All Products
Sort by
Show result

All bodies are sold clear and require trimming.  
They are shown cut out and painted for advertising purposes only.

RM138.00

●WHITE LED BACK LIGHT●LARGE FULL-DOT LCD MONITOR(128x64dot)
●ST TH TENSION ADJUSTMENT●ADJUSTABLE TRIGGER●BUILT-IN ANTENNA
●TELEMETRY FUNCTION●DUAL RATE●SERVO SPEED●SERVO REVERSE
●TRIM/SUB TRIM●CURVE(EXPONENTIAL / ADJUSTABLE RATE CONTROL)
●FAIL SAFE(RADIO WAVES / BATTERY)●EPA●OFFSET●BIND●BASE
●FUNCTION●TH TYPE(70:30/50:50)●ANTI-LOCK BRAKE●MODEL NAME(10 LETTERS)
●MODEL MEMORY(20 MODELS)●MODEL(SELECT/CLEAR/COPY)
●TIMER(LAP / INTERVAL / DOWN)●LOGGER●ALERT SETTING●TELEMETRY SETTING
●KEY ASSIGN(SW / TRIM)●BUZZER(SCALE / VOLUME CHANGEABLE)
●TRANSMITTER BATTERY ALARM●LCD CONTRAST●VOLUME ADJUSTMENT
●SETUP WIZARD●RF MODE SETTING(FH4/FH3)●RESPONSE MODE (NOR/SHR/SSR)
●DIRECT MODEL SELECT●AUX1(SELECT THE OPERATION TYPE OF 3CH)
●AUX2(SELECT THE OPERATION TYPE OF 4CH)
●AUX TYPE SETTING
CODE AUX (COMPATIBLE WITH SUPER VORTEX ZERO & TYPE-D MENU)
STEP AUX (STEP 1 to 100)
POINT AUX (2 to 6 POINT)
4WS MIXING (FRONT/REAR/NORMAL/REVERSE
MOA MIXING(FRONT-WHEEL-DRIVE/4WD/REAR-WHEEL-DRIVE)
*DRIVE RATE IS VARIABLE.
AUX MIXING (ST MIXING, TH MIXING)
●4 CELL DRY BATTERY
●COMPATIBLE RECEIVER; RX-380, RX-381, RX-451, RX-451R, RX-461, RX-462, RX-471,
RX-472, RX-481, RX-482

RM850.00
RM12.00

Specifications:

Operation Voltage - AAA battery X 2

Operation Current - ≤40ma@2.0V

Operation Temperature - 0-40℃

Current Drain - ≤25ua@3V

 

Precision:

-40℃-0℃ +/-1℃

0℃-60℃ +/-0.5℃

60℃-120℃ +/-1℃

120℃-180℃ +/-2℃

180℃-240℃ +/-3℃

240℃-360℃ +/-4℃

Adjustable Range for Infrared Emission Frequency - 0.01-1

Dimension - 121x40x39.6mm

Weight - 75g

RM189.00

SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double side tape. (Two kinds of bottom covers are included, user can change the bottom cover.) The switch also features a LiPo mode, by turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turn off if you have other safeguards in place or using NiMH/NiCad battery. Beside that the power switch informs you about the remaining capacity and conditions of your battery pack.

 

SWITCH ON/OFF SETUP


1. NiMH/NiCad Battery Pack


For switching on please press and hold the button for one second. The PWR LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

 

2. LiPo Battery Pack


For switching on please press and hold the button for more than three second. The PWR LED and LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

 

Specifications:

  • Input Voltage: 4-12V
  • Max. Current: 10 Amp
  • Battery Mode: 1. NiHM / NiCad  2. LiPo
  • Low Voltage Protection: 6.2V(LiPo)
  • Operating temperature: 0-50℃
  • Weight: ≤7g
RM65.00

The Smart-Com system is the result of close collaboration with many racers, it has been tailor-made for radio controlled model (RC) racing, making and for people who need effective hands-free communication.

Contents:

- 1 "Master" headset with LCD screen

- 1 "Remote" headset with LCD screen

- Carrying bag

- 2 foams for microphones

- 2 Li-Ion batteries

- instruction manual

Smart-Com integrates enhanced digital wireless technology (DECT) with the Dialog SC14S DECT module to allow you to communicate clearly in real time, within a radius of 300 meters. It is approved for FFVRC, EFRA and IFMAR races.

The Smart-Com electronic system consists of the battery, an internal charger and a 0.96 inch LCD screen which are housed in the headset. The system works with a base station and the headsets are programmable in the field.

Smart-Com headsets allow simultaneous conversation and two-way voice communication with partners. The flexible microphone rod has a 270 ° rotational movement and can be easily swapped between left and right side, using an auxiliary switch. The microphone can be muted with a simple rocking motion of the microphone stick.

Smart-Com headsets also include a SmartPit programmable voice prompt feature. This function includes training mode, stopwatch mode and race mode. The start / pause / reset function is controlled by the mechanics team using the button on the microphone arm.

Training Mode:

Voice feedback of lap time feedback to the driver and remote headset immediately after the pit crew activates the button on the mic arm.

Timer mode:

Programmable timer reminder pre-set by the main headset. Timer voice prompt reminder to driver and remote headset automatically when triggered.

Race mode:

Pre-set programmable race time and fuel reminder from the main headset. The voice reminders of the time of the race and the time of refueling will automatically remind once the race has been started by the pit team.

Replaceable lithium battery:

The Smart-Com wireless headset comes with a rechargeable lithium battery that is installed in the headset. The batteries are Standard SLB-1137D lightweight type.

They fully charge can work for up to 4 hours. As they are removable, they can be charged externally with any LP Standard charger and can be changed in seconds (charger sold separately).

Internal Charger :

All Smart-Com headsets are built with an internal charger inside the headset battery compartment and are charged using a USB-C cable with a standard 5V / 1A adapter.

When each battery reaches its full charge, the corresponding LED will change from red to green indicating that the battery is ready for use. Magnetic adapters and cables are optional accessories. The accessories allow the headset to have a quick “plug-in and release” of the charging cable.

Travel bag:

A soft carry bag is included to keep your helmet system safe. The case is constructed of waterproof nylon and includes internal compartments.

RM1,490.00