RADIO, SERVO & RECEIVER
Sort by
Show result

NB4a.png

Noble

The NB4 is the newest, fastest and most stylish ground transmitter to date. Not only does it look great with its new sleek design and metal finish, it also features new flexibility and functionality never seen before in the RC world.

手轮动图500-360.gif

180 DEGREES OF FREEDOM

The patented wheel mount can rotate 180 degrees ensuring comfort for anyone.


DUAL BATTERY SYSTEM

The NB4 is equipped with 2 batteries, one in the handle and one removable power bank in the base. The base will charge the battery in the handle when connected and when disconnected the power bank can be used to charge other devices using it’s USB output.

NB4c.png


NB4语音振动马达.png

HAPTIC FEEDBACK

Embedded force feedback motors ensure you are alerted every time, even in noisy environments.

NB4b.png

ADJUSTABLE

Both the trigger size and throw are adjustable.


COMFORTABLE

The NB4 is designed to be as comfortable as possible for long sessions at the track. This combined with the 180 degree wheel mount, means everyone will have a comfortable way to drive.

NB4e.png


NB4全家福 (1).png

AFHDS 3

Equipped with our newest RF technology, AFHDS 3, the NB4 is now the most flexible option for cars and boats. For extra low latency enable sports mode to have latency times as low as 3ms.

Specifications

 

Channels:                   4

Freq. Range:              2.408-2.480GHz

2.4GHz Protocol:       AFHDS 3

Modulation:                LORA

Data Output:               Micro USB

Charging Port:            Micro USB

Power:                        <20dBm(EU)

Antenna Type:           Built-in antenna

Battery:                      1S/4.2V Lithium Polymer

Online Update:          Yes

Dimensions:              129*114*190mm

Weight:                     520g

Certification:             CE,FCC ID:N4ZFG400

RM890.00

●WHITE LED BACK LIGHT●LARGE FULL-DOT LCD MONITOR(128x64dot)
●ST TH TENSION ADJUSTMENT●ADJUSTABLE TRIGGER●BUILT-IN ANTENNA
●TELEMETRY FUNCTION●DUAL RATE●SERVO SPEED●SERVO REVERSE
●TRIM/SUB TRIM●CURVE(EXPONENTIAL / ADJUSTABLE RATE CONTROL)
●FAIL SAFE(RADIO WAVES / BATTERY)●EPA●OFFSET●BIND●BASE
●FUNCTION●TH TYPE(70:30/50:50)●ANTI-LOCK BRAKE●MODEL NAME(10 LETTERS)
●MODEL MEMORY(20 MODELS)●MODEL(SELECT/CLEAR/COPY)
●TIMER(LAP / INTERVAL / DOWN)●LOGGER●ALERT SETTING●TELEMETRY SETTING
●KEY ASSIGN(SW / TRIM)●BUZZER(SCALE / VOLUME CHANGEABLE)
●TRANSMITTER BATTERY ALARM●LCD CONTRAST●VOLUME ADJUSTMENT
●SETUP WIZARD●RF MODE SETTING(FH4/FH3)●RESPONSE MODE (NOR/SHR/SSR)
●DIRECT MODEL SELECT●AUX1(SELECT THE OPERATION TYPE OF 3CH)
●AUX2(SELECT THE OPERATION TYPE OF 4CH)
●AUX TYPE SETTING
CODE AUX (COMPATIBLE WITH SUPER VORTEX ZERO & TYPE-D MENU)
STEP AUX (STEP 1 to 100)
POINT AUX (2 to 6 POINT)
4WS MIXING (FRONT/REAR/NORMAL/REVERSE
MOA MIXING(FRONT-WHEEL-DRIVE/4WD/REAR-WHEEL-DRIVE)
*DRIVE RATE IS VARIABLE.
AUX MIXING (ST MIXING, TH MIXING)
●4 CELL DRY BATTERY
●COMPATIBLE RECEIVER; RX-380, RX-381, RX-451, RX-451R, RX-461, RX-462, RX-471,
RX-472, RX-481, RX-482

RM850.00

SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double side tape. (Two kinds of bottom covers are included, user can change the bottom cover.) The switch also features a LiPo mode, by turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turn off if you have other safeguards in place or using NiMH/NiCad battery. Beside that the power switch informs you about the remaining capacity and conditions of your battery pack.

 

SWITCH ON/OFF SETUP


1. NiMH/NiCad Battery Pack


For switching on please press and hold the button for one second. The PWR LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

 

2. LiPo Battery Pack


For switching on please press and hold the button for more than three second. The PWR LED and LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

 

Specifications:

  • Input Voltage: 4-12V
  • Max. Current: 10 Amp
  • Battery Mode: 1. NiHM / NiCad  2. LiPo
  • Low Voltage Protection: 6.2V(LiPo)
  • Operating temperature: 0-50℃
  • Weight: ≤7g
RM65.00